ccna 640-802 有關rip指令－jpjzhf9的部落格

標題:

此文章來自奇摩知識+如有不便請留言告知

ccna 640-802 有關rip指令

發問:

請問有關rip v2的指令如何下ipv4 addresses must be configured as follows:Ethernet network 209.165.202.128/27 -router has** last** assignable host address in subnetSerial network 192.0.2.16/28 -router has** last** assignable host address in subnetipv4 addresses must be configured as... 顯示更多請問有關rip v2的指令如何下 ipv4 addresses must be configured as follows: Ethernet network 209.165.202.128/27 -router has** last** assignable host address in subnet Serial network 192.0.2.16/28 -router has** last** assignable host address in subnet ipv4 addresses must be configured as follows: Ethernet network 209.165.201.0 -router has **fourth** assignable host address in subnet Serial network 192.0.2.176/28 -router has **last** assignable host address in subnet 指令是在宣告 ip 位置時 ip如果遇到 last 跟fourth 要如何下請高手解答

最佳解答:

這一題根本就是在考算 IP 嘛！ 2009-10-08 14:52:20 補充：呵呵呵！這個題目中的兩個關鍵字說明如下： Last -- 最後一個 Fourth -- 第四個哈哈哈！看懂了嗎？舉例來說 Ethernet network 209.165.201.0 -router has **fourth** assignable host address in subnet 指令應該要下 (config)# interface ethernet 0 (config-if)# ip address 209.165.201.4 255.255.255.0 (config-if)# no shutdown （沒給 Subnet Mask 所以我假設 Subnet Mas 是 /24）另外 Serial network 192.0.2.176/28 -router has **last** assignable host address in subnet 指令應該要下 (config)# interface serial 0 (config-if)# ip address 192.0.2.190 255.255.255.240 (config-if)# no shutdown 對了，這只是在介面設定 IP 而已哦！RIPv2 的指令還要另外下所以這一題只要看懂題目的話，一點都不難喔！

其他解答:F893957AEB7D5408